Pressure Tank Repair in Central Florida

Your pressure tank is what keeps your well pump from running every time someone opens a faucet. When it fails, the pump pays for it. LPR Services provides well pressure tank repair, replacement, and installation for residential well systems throughout Central Florida.

Bladder tanks, pressure switches, gauge assemblies — we replace the failed part and correct the pressure settings so the whole system works the way it should.

What We Repair and Replace

• Bladder and diaphragm pressure tanks
• Galvanized and captive-air tanks
• Pressure switches (30/50, 40/60, and custom settings)
• Pressure gauges and tank tee assemblies
• Check valves, unions, and tank fittings

Pressure problems often start upstream. See our Irrigation Pump Repair and Centrifugal Pump Repair pages.

Signs Your Pressure Tank Is Failing

The Pump Cycles Rapidly

Short-cycling is the classic waterlogged-tank symptom. The tank has lost its air charge, so the pump kicks on and off every few seconds. Left alone, that cycling kills the motor.

Low or Fluctuating Water Pressure

Pressure that surges and drops while you shower usually points to a failed bladder or a switch that's out of adjustment — not a weak pump.

Water Coming From the Air Valve

Air on the top of the tank should be air. Water at that valve means the bladder has ruptured, and the tank needs replacing.

Rust, Sweating, or a Heavy Tank

A tank that feels full when tapped, or shows rust at the seams, is at the end of its life. We size the replacement to your pump and household demand.

Our Repair Process

1. Test the system — tank pre-charge, switch settings, and pump cycle time
2. Diagnose the real fault — tank, switch, gauge, or pump
3. Quote before we work — clear pricing, repair-vs-replace guidance
4. Install and verify — correct pre-charge, then run the system and confirm pressure

Frequently Asked Questions

How long does a pressure tank last?

Most bladder tanks last 8 to 15 years. Florida groundwater and frequent cycling shorten that.

Can a pressure tank be repaired instead of replaced?

Sometimes. A low air charge or bad switch is a repair. A ruptured bladder is a replacement.

What size tank do I need?

It depends on pump flow rate and household demand. We size it during the visit — undersized tanks are the top cause of short-cycling.

Why is my pressure switch clicking constantly?

Usually a waterlogged tank. It can also be a clogged switch port or failing pump.

Do you install tanks you didn't sell?

Yes. We'll install a tank you've purchased, though we'll confirm it's correctly sized first.

Get Your Water Pressure Back

A failing tank only gets more expensive — it takes the pump with it. Contact LPR Services for your free pressure tank estimate .

Request your free quote today and get steady pressure back at every fixture.

Ready to Solve Your Water Problems?

Let LPR Services get your water flowing right with expert diagnostics, honest answers, and repairs done right the first time. No pressure—just dependable work, guaranteed.